Oblique projection is a method of
drawing objects in 3 dimensions. It is quite a simple technique
compared to isometric or even perspective drawing. However, to draw
accurately in oblique projection traditional drawing equipment is
needed (see diagram below).
The technique for drawing a cube in oblique projection is outlined below, stage by stage. To draw it correctly in oblique projection three main rules must be followed:
1. Draw the front or side view of the object.
2. All measurements drawn backwards are half the original measurement.
3. 45 degrees is the angle for all lines drawn backwards
A. Draw the front view. Remember to use a T-square and 45 degree set square.
B. Draw 45 degree lines from each corner of the square. The distance of any lines drawn back at 45 degrees should be halved. For example, a cube may have sides of 100mm but they must be drawn 50mm in length. This should mean that the cube will look more realistic and in proportion.
C. Draw 45 degree lines from each corner of the square. The distance of any lines drawn back at 45 degrees should be halved. For example, a cube may have sides of 100mm but they must be drawn 50mm in length. This should mean that the cube will look more realistic and in proportion.
ليست هناك تعليقات:
إرسال تعليق